Contact Us
Drills MD6380
Request a QuoteKey Information
Tool Load
Up to 53,845 kg
Hole diameter
251 mm - 381 mm
Engine
3512C CAT®
Overview
Intelligence. Precision. Power.
Designed for drilling large production wells in very hard rocks, the advanced MD6380 CAT® offers an optimal combination of onboard air, feed force, rotary torque, and machine mobility. This powerful and robust machine withstands the conditions of any job site and provides reliable performance and high availability. Sturdy structures and an integrated A-frame mast allow it to withstand the toughest conditions, ensuring long life and reliable performance. With a next-generation cabin and operator station, the MD6380 is designed for comfortable and productive work throughout the day. Designed for drilling holes from 251 to 381 mm (9.875 to 15 in) in diameter, the MD6380 is optimized for single or multi-pass drilling, both for rotary and down-the-hole hammer drilling modes.
AdvantagesTechnological Advancements
Integrated condition monitoring and drilling assistance, factory-prepared for MineStar CAT® autonomy
Exceptional Maneuverability
Compact digging area, faster setup, low center of gravity, and hydraulic shovel-type undercarriage.
Exceptional Visibility
Improved cabin with large windows, interior lights, and high-resolution camera monitor
Key Features
- A State-of-the-Art Driving Position
- 100% Cat Integration
- The Cat Electronics: The Backbone of the Machine
- Adjusted Powertrain Group
- Technology And Automation
- Durability
A State-of-the-Art Driving Position
Ergonomic controls allowing the driver to stay alert and avoid fatigue Controls through multifunction manipulator and easy-to-use and intuitive touch screens Incredible visibility, achieved through numerous cameras and panoramic windows A heated and ventilated seat for greater driver comfort
100% Cat Integration
Fully Cat, with parts, components, and design features common to all Cat drill models Shared software for autonomous features Benefiting from world-class support from the Cat dealer network
The Cat Electronics: The Backbone of the Machine
A common electronic architecture within all Cat machines to ensure technician control The ET Cat electronic device allows for quick and simple troubleshooting Serves as a common platform for integrating future autonomy solutions Product Link™ Elite provides real-time performance monitoring
Adjusted Powertrain Group
Variable air volume for reduced fuel consumption A C27 engine adapted to the largest series compressor in this category, in order to achieve fast cycle times A kinematic chain optimized to withstand difficult drilling applications High and low pressure configurations allow for variable control of air volume Optimal feed force, rotary torque, and air intake reduce fuel consumption
Technology And Automation
Drill Assist functionality, incorporating automatic leveling, automatic jacks, automatic raising and lowering of the mast, and automatic drilling Monitoring of machine health and performance allows for productivity optimization Drilling depth counter reduces excessive or insufficient drilling Ready to connect to the Cat MineStar™ suite of technologies, including Terrain for drilling and Command for drilling
Durability
Designed to consume less fuel, which reduces engine emissions Reduced waste production and reduced operating costs through increased system and component similarity, as well as a reduction in unique part numbers. Extended maintenance intervals reduce the amount of waste released into the environment.
Product Specifications for MD6380
- SPECIFICATIONS
- Tool WeightUp to 53,845 kg (118,719 lb)
- Hole Diameter251-381 mm (9.875-15 in)
- Engine3512C CAT® at 1800 RPM
- ENGINE
- Rated Power (ISO 14396)949 kW
- Emissions (1)U.S. EPA Tier 2 / Stage II for European Union
- Rated Power (J1995)960 kW
- Engine3512C CAT® at 1800 RPM
- COMPRESSOR/RECEIVER
- OptionRotary, Single-Stage, Low Pressure 101.9 m³/min (3600 ft³/min) at 6.9 bar (100 psi) with ASME/CRN/AU or CE low-pressure receiver tank
- COOLING
- FeaturesFunctional up to 52 °C (125 °F) ambient temperature
- UNDERCARRIAGE
- 374 EEL Cat - Double Grouser for Hard Rock Applications750 mm
- 374 EEL Cat - Drawbar Pull980,686 Nm
- 374 EEL Cat - Double Grouser for Soft Rock Applications900 mm
- HYDRAULIC SYSTEM
- Components (1)Two (2) Main Pumps - 280 cc (piston, with proportional electronic controls)
- Components (2)One (1) Implement Pump - 145 cm3 (piston, load-sensing)
- Components (3)Two (2) Fan Pumps - 100 cm3 (piston, with proportional electronic controls)
- Components (4)Two (2) Breakout Pumps - 74 cm3 (fixed displacement)
- Components (5)Scheduled Oil Sampling Ports (S·O·SSM)
- MAST
- Note (1)Vertical or Inclined Drilling
- Hole Diameter Range251-381 mm (9.875-15 in)
- Pull-Up Capacity Up to49,895 kg
- Tool Weight Up to53,845 kg
- Rotation Torque Up to20,880 Nm
- Single-Pass Hole Depth Up to19.8 m
- Multi-Pass Hole Depth Up to39.5 m
- MAST ACCESSORIES
- Accessory (1)Engage/Disengage Rod Handler (Stabilizer) Indicator, Interlocks
- Accessory (2)Hydraulic Rod Handler Sensor
- Accessory (3)Hydraulic Rod Holder on Mast Top
- ROD LOADER
- FunctionLeft/Right Side Rod Racks with 9,906 m (32.5 ft) Drill Rod
- 324 mm (12.75 in) Diameter- Single Rod Rack
- Dust Collector Side Only
- Single Pass Only - 340 mm (13.375 in) Diameter- Single Rod Rack
- Dust Collector Side Only
- Single Pass Only - 219 mm (8.625 in) Diameter- Dual Rod Rack Left and Right Sides
- Single or Multi Pass
- Main Loader 29.68 m (97.4 ft)
- Aux Loader 39.59 m (129.9 ft) - 273 mm (10.75 in) Diameter- Dual Rod Rack Left and Right Sides
- Single or Multi Pass
- Main Loader 29.68 m (97.4 ft)
- Aux Loader 39.59 m (129.9 ft) - 235 mm (9.25 in) Diameter- Dual Rod Rack Left and Right Sides
- Single or Multi Pass
- Main Loader 29.68 m (97.4 ft)
- Aux Loader 39.59 m (129.9 ft)
- BREAKOUT WRENCH
- Variable Grip- 219, 235, 273 mm (8.625, 9.25, 10.75 in)
- 324, 340 mm (12.75, 13.375 in)
- Variable Grip- 219, 235, 273 mm (8.625, 9.25, 10.75 in)
- DRILLING TOOL PACKAGE
- Single-Piece Roller Latch Sub, Rod Positioner, Rod Wrench, Tool Joint Adapters, Rod Wiper- 219 mm (8.625 in)
- 235 mm (9.25 in)
- 273 mm (10.75 in)
- 324 mm (12.75 in)
- 340 mm (13.375 in)
- Single-Piece Roller Latch Sub, Rod Positioner, Rod Wrench, Tool Joint Adapters, Rod Wiper- 219 mm (8.625 in)
- CONNECTORS
- Shock Sub with Top Rod Connector, available in Standard or Premium version- 219 mm (8.625 in)
- 235 mm (9.25 in)
- 273 mm (10.75 in)
- 324 mm (12.75 in)
- 340 mm (13.375 in)
- Shock Sub with Top Rod Connector, available in Standard or Premium version- 219 mm (8.625 in)
- OPERATOR'S STATION
- Deluxe Cab- Leather Heated/Ventilated Seat, Heavy-Duty Suspension, Double Pane Glass
- Additional Storage and Front/Rear Windshield Wipers
- Removable Drilling Glass Protection, Front Windshield Protection, Instructor Seat - Standard Cab- Fabric Seat, Single Pane Glass, Sun Visor, Drilling Glass Wipers, Removable Drilling Glass Protection, Instructor Seat
- Deluxe Cab- Leather Heated/Ventilated Seat, Heavy-Duty Suspension, Double Pane Glass
- FLUIDS
- Standard Service Package- Fast Fuel and Water Fill Only
- Automatic Lubrication System - Deluxe Service Package- Service Center for Drain/Fill of Lubricants
- Fast Fuel and Water Fill
- Automatic Lubrication System
- Standard Service Package- Fast Fuel and Water Fill Only
- DUST SUPPRESSION
- Water Injection System2,271 l
- Total Capacity of High-Volume Water Injection System Tank5,299 l
- Total Capacity of High-Volume Water Injection System Tank (Note 1)2,271 l (600 US gal) tank, mounted under subframe
- Water Injection System (Note 1)Subframe-Mounted Tank
- Water Injection/Dry Dust Collector2,271 l
- Total Capacity of High-Volume Water Injection System Tank (Note 2)3,028 l (800 US gal) tank, deck-mounted
- Water Injection System (Note 2)Fast Fill
- Water Injection/Dry Dust Collector (Note 2)Fast Fill
- Water Injection/Dry Dust Collector (Note 1)Subframe-Mounted Tank
- Water Injection and Dry Dust Collector (3)Dry Dust Collection: 204 m³/min (7,200 ft³/min)
- Total Capacity of High-Volume Water Injection System Tank (Note 3)Fast Fill
- BATTERIES
- Note (2)Six (6) sealed batteries
- Required for Semi/Full Autonomous Sets - Note (1)Four (4)
- Note (2)Six (6) sealed batteries
- sealed batteries
- AIR CONDITIONING OPTIONS
- Level 1 Air Conditioning Standard Fluids and Lubricants (1)- Temperature Range of -1 °C (30 °F) to 52 °C (125 °F)
- Level 2 Air Conditioning Polar Fluids and Lubricants- Temperature Range Down to -18 °C (-0.4 °F)
- AUTOMATION AND TECHNOLOGY
- Components (6)Product Link™
- Components (5)Electric Controls for Drilling, Tramming, Leveling, and Auxiliary Functions
- Type (1)Radio Pre-Wire for Communication and Audio Entertainment
- Type (2)Integrated Full Terrain for Drilling System with Wiring and Harnessing
- Components (1)Single-Pass Drill Automation/Drill Assist
- Components (2)Drill Assist/Multi-Pass Drill Automation
- Components (3)Drill Depth Counter
- Components (4)Auto Level, Auto Stabilizer Jacks, Auto Mast Raise/Lower
- DIMENSIONS (APPROXIMATE)
- Raised Mast Height26.7 m
- Lowered Mast Height6.6 m
- Lowered Mast Length28.3 m
- Note*Working Mast Length Raised with Bolt-On Platform Adds 1.2 m (4 ft) for a Total Length of 15.9 m (52.1 ft)
- Working Width (Non-Drill Side)6.06 m
- Working Width (Drill Side)6.89 m
- Mast Shipping Length Alone25.24 m
- Working Length with Mast Raised*14.7 m
- WEIGHT
- Mast Alone40,000 kg
- Without Mast102,300 kg
- Operating Weight Range142,300 kg (313,717 lb)
Standard Equipment for MD6380
-
POWERTRAIN
- ASME/CRN/AU Receiver Tank or CE Receiver Tank
-
CABIN
- Standard Cabin
- Including Fabric Seat, Single Glazing, Sun Visor, Windshield Wiper, Removable Windshield Guard, and Instructor Seat
- Inspection Hatch on Top of Hole
- LED Lighting
-
CONTROLS
- Basic Drilling Depth Indicator and Interlocks
-
PRODUCT LINK/TERRAIN
- Product Link (Cellular)
-
MAST
- No Mast Access/Handrail Only
-
ROD HANDLER (CHOICE)
- 219 mm (8.625 in) Diameter
- Two Rod Racks
- Single-Pass and Multi-Pass
- 235 mm (9.25 in) Diameter
- Two Rod Racks
- Single-Pass and Multi-Pass
- 273 mm (10.75 in) Diameter
- Two Rod Racks
- Single-Pass and Multi-Pass
- 324 mm (12.75 in) Diameter
- One Rod Rack
- Dust Collector Side Only
- Single-Pass Only
- 340 mm (13.375 in) Diameter
- One Rod Rack
- Dust Collector Side Only
- Single-Pass Only
-
UPPER ROD LINK/SHOCK LINK (OPTIONAL)
- 219 mm (8.625 in) standard
- 235 mm (9.25 in) standard
- 273 mm (10.75 in) standard
- 324 mm (12.75 in) standard
- 340 mm (13.375 in) standard
-
TOOL ARRANGEMENTS (OPTIONAL)
- 219 mm (8.625 in)
- Single-piece Roller Bit Ring, Rod Positioner, Bit Key, Tool Holder Fittings, and Rod Wiper
- 235 mm (9.25 in)
- Single-piece Roller Bit Ring, Rod Positioner, Bit Key, Tool Holder Fittings, and Rod Wiper
- 273 mm (10.75 in)
- Single-piece Roller Bit Ring, Rod Positioner, Bit Key, Tool Holder Fittings, and Rod Wiper
- 324 mm (12.75 in)
- Single-piece Roller Bit Ring, Rod Positioner, Bit Key, Tool Holder Fittings, and Rod Wiper
- 340 mm (13.375 in)
- Single-piece Roller Bit Ring, Rod Positioner, Bit Key, Tool Holder Fittings, and Rod Wiper
-
VARIABLE GRIP HYDRAULIC CONTROLLED BREAKOUT WRENCH (SELECT A MODEL)
- Grip Range
- 219, 235, 273 mm (8.625, 9.25, 10.75 in)
- Grip Range
- 324, 340 mm (12.75, 13.375 in)
-
DRILL STEM LENGTH - 9.9 M (32.5 FT)
- No Thread Greasers
-
BIT ARRANGEMENT (OPTIONAL)
- Hydraulic Tool Basket
-
SERVICE PACKAGES/FLUID SYSTEM
- Standard Fuel and Water Fast Fill System, Auto Lubrication System
-
CLIMATE/REGION CONSIDERATIONS
- Low-Pressure Air Receiver Tank (ASME/CRN/AU) or
- Low-Pressure Air Receiver Tank (CE)
- Four (4) Batteries
- Climate Level 1
- Normal Fluids and Lubricants
- With Temperature Range from -1°C (30°F) to 52°C (125°F)
- CE Certifications
-
FRAME/UNDERCARRIAGE
- No Tool Storage Bin (Lid Only)
- No Boom (Lid Only)
-
DUST SUPPRESSION
- Water Injection Only (No Dust Collector)
- 2,271 L (600 US gal) Tank Below Deck
-
UNDERCARRIAGE (SELECT A MODEL)
- Double 750 mm (29.5 in) Grouser for Hard Rock or
- Double 900 mm (35.4 in) Grouser for Soft Rock
Available Options for MD6380
-
CABIN
- Premium Cabin
- With Heated and Ventilated Leather Seat, Heavy-Duty Suspension, Double Glazing
- Additional Storage Compartment and Front/Rear Windshield Wipers, Removable Drilling Window Guard, Front Windshield Guard, and Instructor Seat
- Cabin Roof Access System (includes ladders, cage, and rails)
- Travel Lights (front and cabin)
-
CONTROLS
- Auto Drill Assist
- Single-Pass Auto Drilling
- Auto Drill Assist
- Multi-Pass Auto Drilling
- Pressure Gauge
- Remote Movement
-
PRODUCT LINK/TERRAIN
- Product Link (Satellite)
- Product Link (Dual)
- Terrain (Guidance)
-
MAST
- Mast Access Version
- Including Catwalk, Handrails, Landing Platforms, and Walkway
- Drill Stem Thread Greasers
- Tool Lubrication System
- Rotary Table, 113.5 L (30 US gal)
- Mast Height Beacon
- Hanging Winch Assembly
- Including Wire Rope, Hook, and Remote Control
-
UPPER TOOL JOINT/SHOCK SUB ASSEMBLY (OPTION)
- 219 mm (8.625 in)
- 235 mm (9.25 in), Premium
- 273 mm (10.75 in) Premium
- 324 mm (12.75 in) Premium
- 340 mm (13.375 in) Premium
-
DRILL STEM LENGTH - 9.9 M (32.5 FT)
- 219 mm (8.625 in) Diameter
- 235 mm (9.25 in) Diameter
- 273 mm (10.75 in) Diameter
- 324 mm (12.75 in) Diameter
- 340 mm (13.375 in) Diameter
- Drill Stem Thread Greasers
-
BIT ASSEMBLY (OPTION)
- 9.875 in (251 mm) Bit
- 10.625 in (270 mm) Bit
- 12.25 in (311 mm) Bit
- 251 mm (9.875 in) Bit Lock Plate
- 270 mm (10.625 in) Bit Lock Plate
- 311 mm (12.25 in) Bit Lock Plate
- 349 mm (13.75 in) Bit Lock Plate
- 381 mm (15 in) Bit Lock Plate
-
MAINTENANCE TOOLS
- 152 mm (6 in) BECO Lifting Bail for 194 to 235 mm (7.625 to 9.25 in) Stem
- 203 mm (8 in) BECO Lifting Bail for 273 to 324 mm (10.75 to 12.75 in) Stem
- 254 mm (10 in) BECO Lifting Bail for 340 mm (13.375 in) Stem
- 168 mm (6.625 in) API Standard Thread Lifting Bail for 251 to 349 mm (9.875 to 13.75 in) Bit
- 178 mm (7 in) API Standard Thread Lifting Bail for 381 mm (15 in) Bit
- 8.625 to 10.75 in Stem Retainer Tool (6 in, 7 in, 7.8 in Flats)
- 12.75 to 13.378 in Stem Retainer Tool (10.5 in, 11.38 in Flats)
-
MAINTENANCE PACKS/FLUID SYSTEM
- Premium with Service Center for Lubricant Drain and Fill. Automated Lubrication, Quick Fuel and Water Fill
-
CLIMATE/REGION CONSIDERATIONS
- Six (6) Batteries (Required for Autonomy Packages)
- Climate Level 2
- Arctic Climate Fluids and Lubricants
- Cold Temperatures Down to -18°C (0.4°F)
-
FRAME/DECK
- Tool Storage Chest
- Boom Foot Base Only
- Purge Lines and Nozzle (with Quick Connect Cold End and Drill Deck)
-
DUST SUPPRESSION
- Water Injection and Dust Collector
- 2271 L (600 US gal) Under Deck
- 204 m³/min (7200 ft³/min) Dry Dust Collector
- High Capacity Water Injection
- 5299 L (1400 US gal)
- 2271 L (600 US gal) Deck Mounted and 3028 L (800 US gal) Under Deck Tanks
- Hydraulic Dust Curtain Lift Devices
- Front and Rear (Recommended with Dust Collector)
- System Stoppage Spray
