Contact Us
Wheel loaders 930K
Request a QuoteKey Information
Maximum Gross Power
119 kW
Operating weight
13,130 kg
Bucket capacities
2.1 - 5.0 m³
Overview
Configured for Success
The Cat 930K Small Wheel Loader sets the new standard for productivity, fuel efficiency, and operator comfort. The enhanced Z-bar linkage has been optimized to deliver the fast loading performance of a traditional Z-bar with the added parallel lift and load management capability of a tool carrier. The high torque, low speed C7.1 Engine works in concert with an intelligent hydrostatic drivetrain to provide high fuel efficiency as standard.
Key Features
- Power and Efficiency
- An Easy Job
- Enjoy Comfort All Day Long
- Customize Your Experience
Power and Efficiency
Enjoy the energy efficiency of hybrid machines equipped with an intelligent hydrostatic powertrain that allows you to achieve the best fuel savings on the market thanks to a lower maximum engine speed (only 1600 rpm in Standard mode). With Caterpillar's exclusive Power-By-Range technology, you get power when you need it: it increases power in Range 4 to accelerate on inclines. For your most demanding and difficult applications, a new Performance mode increases power and hydraulic speed in all ranges to complete the work even faster. Compliant with EPA Tier 3 emissions standards for the United States/Stage IIIA for the European Union/equivalent MAR-1 for Brazil, the CAT® C7.1 Engine is fully self-contained. This allows you to fully focus on your work.
An Easy Job
Move more materials with Caterpillar's patented equipment: the Performance series quick coupler buckets and the optimized Z-bar linkage that combines the excavation efficiency of a traditional Z-bar linkage with the features of tool carriers. Its parallel lifting and digging forces throughout its operating range allow you to handle loads safely and confidently, while prioritizing precise control. Multifunction applications have never been easier thanks to dedicated pumps for each circuit and a flow distribution equipment distributor managed by an intelligent power management system. Lift, steer, and maneuver simultaneously, without any compromise. The K-series compact wheel loader simply obeys your every command!
Enjoy Comfort All Day Long
Take a seat inside the new small wheel loader of the K series and enjoy the excellent panoramic visibility and effortless joystick controls, which follow your movements on the fully adjustable suspension seat. The generous dimensions of the operator station, combined with Caterpillar's exclusive hydraulic cylinder damping system and smooth and consistent controls, make it the most comfortable seat on the job site.
Customize Your Experience
The driving modes associated with the industry's very first Hystat™ system designed by Caterpillar, equipped with four unique drivetrain settings, allow you to meet the requirements of your applications while adapting to your personal preferences. Select the classic torque converter for greater flexibility, the classic Hystat system for aggressive engine braking, the Ice mode to optimize vehicle control on slippery surfaces, or the default mode that combines the best features of the Hystat system and torque converter. The touch-sensitive buttons and the optional second screen allow you to configure the machine's performance with precision and simplicity. You can also quickly adjust the hydraulic response, the disengagement positions of the linkage, the maximum wheel torque, and the maximum ground speed to efficiently perform multiple tasks.
Product Specifications for 930K
- ENGINE
- Maximum Gross Power119 kW
- Engine ModelC7.1 CAT®
- Maximum Gross Power - 1,600 RPM - ISO 14396 (Standard Power Mode: Range 1-3*)113 kW
- Rated Net Power - 1,600 RPM - SAE J1349 (Standard Power Mode: Range 1-3*)110 kW
- Rated Net Power116 kW
- Maximum Gross Power - 1,600 RPM - ISO 14396 (DIN) (Standard Power Mode: Range 1-3*)113 kW
- Maximum Net Torque - ISO 9249 (1977)/CEE 80/1269 (Performance Power Mode: Range 1-4)761 Nm
- Displacement (Performance Power Mode: Range 1-4)7.01 l
- Maximum Gross Power - 1,800 RPM - ISO 14396 (Performance Power Mode: Range 1-4)119 kW
- Maximum Gross Torque - ISO 14396 (Performance Power Mode: Range 1-4)787 Nm
- Rated Net Power - 1,800 RPM - ISO 9249 (DIN) (Performance Power Mode: Range 1-4)117 kW
- EmissionsEngine meets EPA Tier 3 emissions standards for the United States/Stage IIIA for the European Union/equivalent MAR-1 for Brazil.
- Rated Net Power - 1,800 RPM - SAE J1349 (Performance Power Mode: Range 1-4)116 kW
- Maximum Gross Power - 1,800 RPM - ISO 14396 (DIN) (Performance Power Mode: Range 1-4)119 kW
- Maximum Net Torque - SAE J1349 (Performance Power Mode: Range 1-4)753 Nm
- Note (2)*Power in Range 4 is increased to match Performance Mode level.
- Rated Net Power - 1,600 RPM - ISO 9249 (DIN) (Standard Power Mode: Range 1-3*)111 kW
- Displacement (Standard Power Mode: Range 1-3*)7.01 l
- Maximum Gross Torque - ISO 14396 (Standard Power Mode: Range 1-3*)787 Nm
- Maximum Net Torque - SAE J1349 (Standard Power Mode: Range 1-3*)753 Nm
- Maximum Net Torque - ISO 9249 (1977)/CEE 80/1269 (Standard Power Mode: Range 1-3*)761 Nm
- Note (1)The stated net power is the power available at the flywheel when the engine is equipped with an alternator and air cleaner.
- Note*Power in Range 4 is increased to match Performance Mode level.
- Rated Net Power - 1,600 RPM - ISO 9249 (Metric) (Standard Power Mode: Range 1-3*)151 hp
- Maximum Gross Power - 1,600 RPM - ISO 14396 (Metric) (Standard Power Mode: Range 1-3*)154 hp
- Rated Net Power - 1,800 RPM - SAE J1349 (Performance Power Mode: Range 1-4)116 kW
- Maximum Gross Power - 1,800 RPM - ISO 14396 (Metric) (Performance Power Mode: Range 1-4)162 hp
- Rated Net Power - 1,600 RPM - SAE J1349 (Standard Power Mode: Range 1-3*)110 kW
- Rated Net Power - 1,800 RPM - ISO 9249 (Metric) (Performance Power Mode: Range 1-4)159 hp
- BUCKETS
- Bucket Capacities2.1-5.0 m3 (2.7-6.5 yd3)
- Bucket Capacities - Normal GP2.1-2.7 m3 (2.7-3.5 yd3)
- Bucket Capacities - Light Material3.1-5.0 m3 (4.0-6.5 yd3)
- WEIGHT
- Operating Weight13130 kg
- Operating Weight (1)Standard Lift - 13,130 kg (28,945 lb)
- Operating Weight (2)High Lift - 13,622 kg (30,029 lb)
- CAB
- ROPSSAE J1040 MAY94, ISO 3471-1994
- FOPSSAE J/ISO 3449 AUG98, Level II, ISO 3449:1992, Level II
- Note (2)Half-cab available as an option.
- Note (1)ROPS cab is standard.
- MAINTENANCE CAPACITIES
- Cooling System32 l
- Hydraulic System - Including Tank165 l
- Fuel Tank195 l
- Transmission - Transmission Box8.5 l
- Engine Crankcase19.5 l
- Rear Axles25 l
- Front Axles26 l
- Hydraulic Tank90 l
- TIRES
- Other region-specific options20.5-25 16 PR (L-3)
- Note (2)In some applications, loader production capabilities may exceed tire capacity (given as t-km/h [t-mph] rating).
- Note (3)Before selecting a tire type, Caterpillar recommends a thorough study of all usage situations with the tire supplier.
- Other region-specific options (1)20.5 R25 radial ply (L-2); 20.5-25 16PR (L-5); 20.5 R25 radial ply (L-5); 600/65 R25 radial ply (L-3)
- Standard size20.5 R25 radial ply (L-3)
- Note (1)Other tire types are available. Contact your Cat dealer for additional information.
- Other region-specific options (2)20.5-25 12PR (L-2); forestry/agriculture; 20.5-25 12PR (L-3); Flexport™ Gen II
- STEERING
- Maximum Flow - Steering Pump130 l/min
- Maximum Steering Torque - 0° (Machine Straight)50375 Nm
- Maximum
- Operating Pressure - Steering Pump24130 kPa
- Number of Turns - Lock to Lock or Lock to Lock3.5 turns
- Maximum Steering Torque - 40° (Maximum Turn)37620 Nm
- Steering Cycle Time - Lock to Lock - At 1,800 RPM: Steering Wheel Speed at 90 RPM2.4 s
- Steering Articulation Angle - Each Way from Center40°
- LOADER HYDRAULIC SYSTEM
- Hydraulic Cycle Time - Performance Mode at 1800 RPM - Free Position, Max Lift at Ground2.7 s
- Hydraulic Cycle Time - Standard Mode at 1600 RPM - Total Cycle Time10.1 s
- Maximum Operating Pressure - Implement Pump25000 kPa
- Hydraulic Cycle Time - Performance Mode at 1800 RPM - Dump, Max Lift Height1.5 s
- Hydraulic Cycle Time - Standard Mode at 1600 RPM - Lift, Ground to Max Lift Height5.7 s
- Hydraulic Cycle Time - Performance Mode at 1800 RPM - Lift, Ground to Max Lift Height5.1 s
- Maximum Flow - Implement Pump - Maximum 4th Function Flow*150 l/min
- Hydraulic Cycle Time - Standard Mode at 1600 RPM - Dump, Max Lift Height1.7 s
- Hydraulic Cycle Time - Performance Mode at 1800 RPM - Total Cycle Time9.3 s
- Discharge Pressure - Tilt Cylinder - Maximum 3rd Function Pressure25000 kPa
- Maximum Flow - Implement Pump190 l/min
- Discharge Pressure - Tilt Cylinder28000 kPa
- Maximum Flow - Implement Pump - 3rd Function*190 l/min
- Hydraulic Cycle Time - Standard Mode at 1600 RPM - Free Position, Ground to Max Lift2.7 s
- Discharge Pressure - Tilt Cylinder - Maximum 4th Function Pressure25000 kPa
- Note*Adjustable from 20 to 100% of maximum flow through secondary display, equipment dependent.
- AXLES
- RearOscillating ±11°; open differential (standard); limited slip differential (optional in some regions)
- FrontFixed; open differential (standard); locking differential (optional)
- TRANSMISSION
- Forward and Reverse Speed - Range 440 km/h
- Note*Creeper speed control allows optimal gear range settings, 1-13 km/h (0.6-8 mph) in Range 1 through secondary display.
- Forward and Reverse Speed - Range 213 km/h
- Forward and Reverse Speed - Range 327 km/h
- Forward and Reverse Speed - Range 1*1-13 km/h (0.6-8 mph)
- NotesDefault setting is 7 km/h (4.4 mph).
- SOUND LEVELS
- Note (3)Declared exterior sound power level is 104 dB(A), in compliance with measurement methods defined in ISO 6395:2008.
- Note (2)Measurement was done at 70% of the maximum engine cooling fan speed. Cab doors and windows were closed.
- Note (1)Dynamic sound pressure level for operator is 72 dB(A) when ISO 6396:2008 standard is used to measure value for enclosed cab.
Standard Equipment for 930K
-
POWERTRAIN
- Automatic Engine Idle Shutdown Feature
- C7.1 Cat Engine
- Power Modes (Standard and Performance)
- "Power-By-Range" Technology (High Power in Range 4)
- Turbocharger and Charge Air Cooler
- Crankcase Breather with Filter
- Code Start (requires secondary display)
- Efficient Coolant up to -34°C (-29°F)
- Under-hood, Oil-bathed Disc Brakes, Fully Hydraulic
- Automatic Fuel Priming Pump
- Variable-Speed Hydraulic Cooling Fan
- Electronic Controlled Hydrostatic Transmission
- Driving Modes (Default, TC, Hystat, and Ice)
- Direction Change Aggressiveness Level (Fast, Medium, Slow)
- Rim Effort Control System, Wheel Torque Adjustment
- Extra-Low Speed Control, Ground Speed Adjustment
- Electric Parking Brake
- Six-Fin-Per-Inch Cooling Group in One-Piece Core
- Throttle Lock and Maximum Speed Limiter
-
HYDRAULIC SYSTEM
- Automatic Bucket and Lift Kickouts, Adjustable from Cab
- Bucket and Fork Modes Adjustable from Cab
- Cushioning at Cylinder Disengagement and Mechanical Stops
- Precise Control (Fast, Medium, Slow) in Fork Mode
- Hydraulic Response Adjustment (Fast, Medium, Slow)
- Hydraulic Diagnostic Connectors and S·O·S℠ Ports
- Load-Sensing Steering and Hydraulic System
-
ELECTRICAL EQUIPMENT
- 115A Heavy-Duty Alternator
- 12V Cab Power Outlets (2)
- 1,000 CCA Batteries (2), 24V System, Battery Disconnect
- Reverse Warning
- Emergency Stop Switch
- Halogen Work Lights and Headlights, LED Rear Lights
- Jump Start Terminal with Remote Jumper Terminals
- Primary and Critical Function Circuit Breakers with Reset
-
DRIVER'S COMPARTMENT
- 75mm (3 in) Retractable Seat Belt with Audible Alarm and Indicator
- Automatic Temperature Control
- External Mirrors with Lower Parabolic Section
- Hydraulic Safety Lever
- Interior Lighting, Door Lights, and Ceiling Light
- Interior Rearview Mirrors (2)
- Lunch Box Storage
- Pre-Wired for Radio Speakers
- Electronic Equipment Controls on Seat, Adjustable
- Multifunction Controls on Steering Column: Lights, Wipers, Turn Signals
- Tilt and Telescoping Steering Wheel
- Tinted Windshield
-
OTHER STANDARD FEATURES
- Wide Opening Hood Doors with Adjustable Opening/Closing Force
- Parallel Lift Loader Linkage
Available Options for 930K
-
OPTIONAL EQUIPMENT
- Integrated Automatic Lubrication System with Secondary Screen Control
- Auxiliary Flow, Third and Fourth Functions, Adjustable via Secondary Screen
- Flashing Beacon Light
- Deluxe Cabin
- Roof-Mounted Front View Camera with Separate Display*
- Rear Window Defroster (Standard in Europe)
- Secondary Display for Adjusting Settings (Standard in Europe)
- Front and Rear Sun Visors
- Integrated Windshield Wiper Blades with Washer, Front and Rear
- Rear View Camera (Standard in Europe)
- Cold Start Package
- Corrosion Protection Package
- Counterweights, (Heavy and for Forestry Excavator)
- Quick Coupler (Fusion™ and ISO 23727)
- Debris Packages (Low, Intermediate, High)
- Front Axle Differential Lock
- Fenders (Extended and Full Coverage)
- Guards (Machine and Operator)
- High-Lift Linkage
- Auxiliary Lights, Halogen or LED with Engine Compartment Illumination
- LED Front Headlights
- Load Check Valves
- Object Detection
- Product Link™ PRO and ELITE with Features for Software Updates via Push Mode, Data Logging, Histograms, and Trend Mapping
- Radio Packages
- Rear Wiper
- Secondary Screen Adjustable Anti-Swing System
- Seats
- Deluxe Seat: Fully Adjustable Air Suspension Seat, Fabric Upholstery, Mid-Backrest, Mechanical Lumbar Support
- Seats
- Premium Seat: Fully Adjustable Air Suspension Seat, Leather and Fabric Upholstery, High-Backrest, Pneumatic Lumbar Support. Heated and Ventilated Seat Cushions and Backrests.
- Steering
- Two Modes and Auxiliary
- CE Certification (Standard in Europe)
- *A Forward-Facing Camera System may be required to meet local EU regulations.
- For more information, contact your local Cat dealer.
Media Gallery
Discover Similar Equipment
Wheel loaders
990K (sawmill version)
Net Power
521 kW
Operating weight
91,807 kg
Engine model
C27 CAT®
ExploreWheel loaders
994K
Net Power
1,297 kW
Operating weight
242,605 kg
Bucket capacities
19.1 - 43.6 m³
ExploreWheel loaders
950 GC
Net Power - ISO 9249
151 kW
Bucket capacities
2.5 - 4.4 m³
Engine model
C7.1 CAT®
ExploreWheel loaders
924K
Maximum Gross Power
105 kW
Operating weight
11,795 kg
Bucket capacities
1.7 - 5.0 m³
Explore